Angle between Planes


Plane 1 [h k l]

v1 in X-axis (default = 0.0)

v2 in Y-axis (default = 0.0)

v3 in Z-axis (default = 0.0)



Plane 2 [h' k' l']

u1 in X-axis (default = 0.0)

u2 in Y-axis (default = 0.0)

u3 in Z-axis (default = 0.0)
It is a control panel for the Lattice Planes. There are controlling a Plane 1 and Plane 2 by inputting the Miller Indices. These planes will display on the screen and showing the angle between these planes. You can input the Miller Indices value in the Text Field and then press the "Enter". The values will return to the main body for calculation.
Bottom Control Panel


Structure Selection
It is used for
selecting different
structure
 Rotation Axis Left
It is used for
Rotating the axis
to left hand side
 Rotation Axis UP
It is used for
Rotating the axis
to Upward side
 Rotation Axis DOWN
It is used for
Rotating the axis
to Downward side
 Rotation Axis Right
It is used for
Rotating the axis
to Right hand side
It is a control panel for controlling the lattice structure and location of Axis. The Choice Menu is used for selecting the Lattice Structure. You can use the mouse and click there. To select the required structure and release the button of the mouse. It will display the required structure. For rotation of axis, you may rotate the axis to Left, Right, Up and Down by pressing the corresponding button. It is used for the different view point of the 3D structure. However, the development of these panel is not finished.

Graphical Results

Plane 1 shows in Yellow color. [2 1 1]

Plane 2 shows in Red color. [1 0 0]












It is the Graphical Results. It shows the corresponding parameter of the control panel.
Lattice Planes Layout
Start "Bravais" Now !!
 Back Icon Start Icon

Back to menu